Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a straightforward and effective method to safeguard your vehicle from theft. It is directly connected to your vehicle's CAN network and is hardly noticeable.
Find a reliable source of power and a point of grounding. It is essential to have these wires properly shielded to avoid electrical shorts.
Preventing theft
The Ghost 2 Immobiliser uses an exclusive PIN code sequence that is created using the electronic buttons on your steering wheel and centre console to ensure that only you are able to start your vehicle. Even if thieves manage to copy your keys or hack into the system of your car and steal your keys, they won't be able start the vehicle. It's also silent and completely undetectable to anyone who tries to use it and you can rest assured that no one will ever know that you have added an extra layer of security.
Another reason that it is so effective in stopping theft is the ability to stop your engine from running, even if an intruder has managed to gain entry. This is accomplished through the use of a secondary device called the Shadow which is connected to the CAN data network in your vehicle and does not communicate via radio frequency, making it difficult for thieves to find or tamper with. Additionally to this, the Shadow can be connected to a tracking/paging system that will allow you to monitor the movements of your vehicle, and it also has an output that can trigger a siren (if authorised) when someone is attempting to steal the vehicle.
It is vital to be in a well-lit area when working with wiring, to aid in identifying the correct wires and avoid any short circuits or accidental disconnections. It is also crucial to check and double-check the connections, and to shield the wiring to shield it from the elements. Cable tie can be used to secure wires and bundle them. This will improve their appearance, and also reduce the risk of them becoming dislodged when the vehicle is in operation.
It is also a great idea to mark the CAN L and H wires with labels or tape. A misidentification of their location could result in an electrical surge that could damage the immobiliser. It is also an excellent idea to test the power source and grounding point with an instrument to ensure that they have a constant 12V supply and a solid grounding.
Easy to use
A ghost immobilise r can help you keep your vehicle secure from theft. It can be linked with an iPhone application for simple management and monitoring. The app will alert you in the event that your vehicle has been altered. It can also help you locate your car in the event of theft.
The Ghost immobiliser is subtle and does not require any special equipment to function. It's linked to the CAN system of your vehicle and is programmed with a unique PIN code you choose. You can activate it by using the series button on your dashboard, steering wheel or the WeCar application. The unique code must be entered before the engine will begin, which means thieves won't be able to just turn on your car and drive away.
Installing an immobiliser Ghost is a straightforward process. But, it's essential to follow the directions to ensure that your vehicle's systems are integrated smoothly. The first step is to unplug the battery. This will prevent accidental airbag deployment and ensure security. It's also important to work in a well-lit space to make accurate connections and avoid mistakes. To ensure a secure and solid connection, it's essential to use connectors of high-quality or a proper soldering.
The CAN H wire and the CAN L wiring are required to connect your Ghost immobiliser with the wiring in your vehicle. Utilizing a diagram of the wiring in your vehicle, identify these wires and locate a suitable spot to connect them. Mark these wires with labels or tape to aid in identifying them during installation.
It's a good idea to test your immobiliser once the connections are made to ensure that it is working as intended. Also, you should test the Transport Mode which disables the Ghost System and allows you temporarily to switch off your security features. This is especially useful in scenarios like servicing or transportation of vehicles. This feature is especially useful if your vehicle is older and requires the battery to be isolated during servicing.
Low-profile
A ghost immobilise r is an ideal method to stop theft from keyless entry vehicles and vans. It works by intercepting the remote control signal of your vehicle and constructing a barrier that thieves are unable to break it without the proper PIN code. It's a discreet and reliable method to safeguard your vehicle and is even suggested by insurance companies to lower monthly cost. It's a low-profile device that is hidden within the buttons of your car and doesn't use LED indicators, which makes it virtually unnoticeable to thieves.
The Ghost immobiliser, unlike most other security systems, is linked to the CAN data network of your vehicle instead of a remote control. The device is tamper proof and thieves cannot disable it by cutting wires. This makes it harder for thieves to steal your vehicle. It's also a great alternative for older cars that don't have a keyless-entry system.
Installing a ghost immobiliser is straightforward when you have the right equipment and materials. You'll need a few basic hand tools, a multimeter for checking electrical values, as well as cable ties or insulation tape to ensure your connections are properly insulated and secure. It is also recommended to remove your battery prior to starting it, and ensure that all wiring is properly connected and insulated to protect theft from thieves.
If you're uncomfortable doing your own immobiliser installation it is possible to find an auto shop near you to handle it for you. They'll handle the entire process beginning with the initial inspection through to the installation. If something goes wrong, they'll offer a guarantee. They'll be capable of answering any questions you may have about the immobiliser, and assist you in deciding whether or not it is the right choice for your car.
The Autowatch Ghost 2 is a smart immobiliser that integrates directly with your car's ECU. This protects against hacking, key cloning, and relay attacks that are common in modern vehicles. It's TASSA certified and provides superior security against theft and theft, so you can be assured that your vehicle is secure when you drive it.
TASSA verified
The Ghost immobiliser system is among the most effective methods to protect your vehicle from theft. It connects to the CAN data network of your vehicle and prevents your engine from starting without your unique PIN code. The system is not detectable by thieves and is an excellent alternative to car alarms. You can change the PIN code at any time, and only you will know it, which will ensure the security of your vehicle.
A TASSA certified installer will complete the installation of Ghost Ghost system within a few hours at your home or place of work. They will also provide you with owners' guides, installation certificates and a complimentary emergency card. They will also demonstrate the device to you and make sure that you are pleased with the service.
The Ghost, unlike other immobilisers is able connect directly to the CAN data network of your vehicle. It can be installed without having to cut any wires. It's also quiet, making it difficult to be detected by thieves. The system is programmed using a an unique PIN that is changeable and you can enter using the buttons on your dashboard and the steering wheel. This blocks anyone else from starting your car, even if they have your key fobs.
When you're ready to install an immobiliser ghost 2 start by disconnecting the battery. This will avoid any airbag deployments or short circuits during the process. Once the battery has been disconnected, it's vital to follow the instructions in the user manual for connecting the immobiliser. You should also consult online resources for further guidance specific to the model of your vehicle.
You should test the immobiliser after completing it to ensure it's functioning properly. Enter the PIN code into the vehicle and attempt to start it. After this you must conduct regular checks to ensure that the immobiliser working correctly. This will help you identify any problems early so that you can fix them quickly.